Star Micronics XR-1000 Printer User Manual


 
FONT SElTING
Pressing the
.%Y button will illuminate a font indicator. Remember that
the printer must be off-line for you to do this. Note that the selection of some
fonts (shown in yellow on the front panel) is shown by an orange indicator,
and the selection of others (shown in green on the front panel) is shown by
a green indicator. Holding down the :FOVT,
button will cycle continuously
between the fonts available.
Font
courier
TW-Light
Letter-Gothic
script
SaIlSerif
Cinema
Internal
Draft
Font Panel Lock
If the ‘FONT-
button is pressed when the printer is turned on, the font will be
“locked”, and no font changes can be made from software. It is still possible,
however, to put the printer off-line and change the font using the +oNi\l
button.
QUIET MODE
To select Quiet mode, the printer must be on-line. While it is on-line, press
the pp~pfi~~~~~ button. This will alternately illuminate and extinguish the
QUIET indicator. When in Quiet mode, the printer will print slightly slower,
but at a reduced noise level.
NOTE
If you press the
PAPERFEW button while the printer is off-line, the @GE3
button will perform its normal function, ie it will feed paper.
13