Star Micronics XR-1000 Printer User Manual


 
Set top-of-form
cEsc>
4
1Bh
34h
27 52
IBM
Thecommandabovesetsthetopof-formpositionatthecurrentpaperposition. There
are no parameters. On receipt of this command, the topof-form position will be set
to the current paper position.
Margins and vertical tab setting control codes
1 Move to next vertical tab position Both 1
I <VT> I
OBh
11
The command above moves the paper to the next vertical tab position. There are no
parameters. On receipt of this command, the printer prints data stored in the print
buffer, and the paper moves to the next vertical tab position or (if there are no more
vertical tab positions on the page), to the top of the next page. If no vertical tab po-
sitions have been set with the <ESD B command or if they have been cleared, the
paper moves forward by one line.
1 Set vertical tab positions Both 1
I cEsc>
B
cno> . . .
cd>
cNuL> I
1Bh 42h
27 66
cno>
cno>
. . .
. . .
cd>
cd>
OOh
00
The command above sets vertical tab positions, where the values represented by
cno> to cnl> are binary values giving the vertical tab positions in lines from the top
of the page. The values given must be in ascending order. If they are not, the sequence
will be terminated. The sequence must end with a <NuL> (ASCII Oh). If no values
are given between the cESC> B and the <NuL>, then all vertical tab positions pre-
viously set will be cleared. Printing will start on the (cn>+l th) line in standard mode,
and the (cn>th) line in IBM mode.
41