Star Micronics XR-1000 Printer User Manual


 
Select superscript/subscript
<ES0
S
<?D
1Bh
53h Cn>
Both
1 27
83 <n> I
The command above will select either superscript or subscript printing, where <II>
is a binary or ASCII value which may take the values OOh through 01 h or “0” through
“1”. If the value is OOh or “0”. superscript printing will be selected, and if <n>=Olh
or “1”. then subscript printing will be selected.
Cancel superscript/subscript Both
1 <ESC>
T
I
1 1Bh
54h
27 84
The command above will cancel superscript or subscript printing (if either has been
selected). Thenxuenopammeters. Ifeithersuperscriptorsubscriptprinting hasbeen
selected, then printing subsequent to receipt of this command will be in the normal
position.
Line space control codes
Line feed
Both
<LF>
OAh
10
The command above advances the paper one line. There are no parameters. If Auto
CR has been selected, a carriage return will also be generated on receipt of a Line
Feed character. l/6 inch line spacing will automatically be selected at power-on.
Reverse line feed
<ESC> CLD
1Bh I)Ah
Both
27
10
The command above will reverse line-feed the paper one line. There are no
parameters. l/6 inch line spacing is automatically selected at power-on.
-
36