Star Micronics XR-1000 Printer User Manual


 
Set line spacing to W72 inch
cEsc>
A en)
Standard
1 1Bh 41h
27 65 Cn>
The command above sets the line spacing in increments of l/72 inch, where <II> is
a binary value. On receipt of this command, line spacing will be set to cn>f72 inch.
1 Define line spacing (l/72 inch increments) IBM 1
<ES0
A
1Bh 41h
27
65
C?D
Cn>
<?D
The command above defines line spacing in l/72 inch increments, where <n> is an
optional binary value ifit is not equal to zero, ou defines the line spacing which will
be implemented after an &SC>2 command has been received. If <n> = 0, then the
current value of line spacing set by a previous cBSC>A command will remain in
force.
Execute <ES&A definition
<ESC>
2
1Bh 32h
27
50
IBM
The command above executes the line spacing previously defined by the cESC>A
command. Thereare no parameters. Ifan <ESC>A sequence has not previously been
entered, then line spacing will be set at 1/6th inch. If an <BSC>A sequence has been
received prior to this command, then any subsequent line feeds will move the paper
by the amount specified by the cESC>A command.
- -
One-time line feed (in l/216 inch increments)
Both
cESC>
J
en>
1Bh 4Ah
<FIB
27 74
c?P
The command above causes a precise paper feed, where OI> is a binary value. On
receipt of this command, the paper will be fed forward by 01>/216 inch. No carriage
return will take place, and the current line spacing value will be unaffected.
36