Star Micronics XR-1000 Printer User Manual


 
Select character height, width, line spaclng
Both
cESC> 1
@
CnoB <nz> <NuLa<NuL> cd> cd>
1Bh
5Bh
40h
cnO~ al> OOh OOh cd> cK?>
27 91
64 -alo> al>
0 0 cnb cd>
The command above is used to control character height, width and line spacing,
where cno> and cnl> (low byte first) ate used to supply the number of subsequent
data bytes (1 or 2). The effect of the two data bytes (ur2> and <n3>) is determined
as follows:
Any superscript/subscript or condensed mode print settings previously selected will
be cancelled. but if double-height printing is cancelled, the printer will return to
superscript/subscript or condensed mode printing, if these were selected previously.
Any previous commands for vertical character enlargement are cancelled by this
command. If double-height and normal-sized characters are printed in the same line,
then the printing will be aligned along the bottom of the normal-sized characters.
61