Star Micronics XR-1000 Printer User Manual


 
a.
L.
L-
L.
b,
. .
L
.
L
Chapter 3
SETTING UP
THE MEMORY SWITCHES
In addition to the pitch and font, many other options regarding the setup of
the printer can be carried out from the tint panel. To access these options,
it is necessary to turn off the printer, and then turn it on again, while holding
down the (ON, (P?PERFEED: and 6E!ZE3 buttons together. This will cause the
printer to print a series of questions and options to which you can answer
using the front panel buttons. This is called the Memory Switch mode.
I POWER
MICRO FEED
I PAPER
SET/EJECT/PARK
PAPER FEED
ONLINE
QUIET
F
ENTER
The principle involved is that the printer will print a list of options on one
l&. you use the $+*+I
and <YF~F+ buttons to move the print head so that
it is below the option you want to choose.
The printer will move the paper up and down as appropriate, so that the menu
options are visible.
The @EE+ button moves the print head one option to the left, and the
,%+ FFD\/ button moves one option to the right (as marked in blue on the front
panel under the buttons). Holding down one of these buttons will still move
the print head only one option forward or back.
When the print head is below the desired option, press the , ON E_\ button to
enter this into the printer’s memory. Any option chosen at this stage will now
be stored, even when the printer is turned off.
17