Filter
Top Products
Introduction, Featueres, and Options Teledyne API T803 CO2/O2 Analyzer Operation Manual
18
HAZARD
OXYGEN IS A STRONG OXIDIZER.
This is a general purpose instrument designed for usage in nonhazardous areas.
Ensure that all safety precautions related combustible gases are followed.
Before working with the casing open, be sure to turn off power to the analyzer, and
perform air or N
2
gas purging of not only the analyzer inside, but also the sample gas
line.
In addition, carefully prevent oil and grease from adhering to any tubing. Otherwise,
poisoning, fire or explosion may be caused due to gas leakage, etc.
1.3. OPTIONS
Table 1-1 presents the options available with this analyzer. For assistance with
ordering, please contact the Sales department of Teledyne API at:
PHONE (toll free,
North America)
800-324-5190
FAX:
858-657-9816
PHONE (Direct):
858-657-9800
E-MAIL:
api-sales@teledyne.com
WEB SITE
www.teledyne-api.com
Table 1-1: Analyzer Options
Option
Option
Number
Description/Notes Reference
Pumps
Pumps meet all typical AC power supply standards while exhibiting same pneumatic
performance.
10A External Pump 100V - 120V @ 60 Hz N/A
10B External Pump 220V - 240V @ 50 Hz N/A
10C External Pump 220V - 240V @ 60 Hz N/A
10D External Pump 100V – 120V @ 50 Hz N/A
10E External Pump 100V @ 60 Hz N/A
14 Internal Pump N/A
13 High Voltage Internal Pump 240V @ 50Hz N/A
Rack Mount
Kits
Options for mounting the analyzer in standard 19” racks
20A Rack mount brackets with 26 in. chassis slides N/A
20B Rack mount brackets with 24 in. chassis slides N/A
21 Rack mount brackets only (compatible with carrying strap, Option 29) N/A
23 Rack mount for external pump pack (no slides) N/A
07276B DCN6418