Filter
Top Products
63
5. SETUP MENU
The SETUP menu is used to set instrument parameters for performing
configuration, calibration, reporting and diagnostics operations.
5.1. SETUP CFG: CONFIGURATION INFORMATION
Pressing the CFG button displays the instrument’s configuration information.
This display lists the analyzer model, serial number, firmware revision, software
library revision, CPU type and other information.
Special instrument or software features or installed options may also be listed
here.
Use this information to identify the software and hardware installed in your
T803 analyzer when contacting Technical Support.
To access the configuration table, press:
SETUP X.X PRIMARY SETUP MENU
CFG ACAL DAS RNGE PASS CLK MORE EXIT
SETUP X.X SUPPORT: TELEDYNE-API.COM
PREV NEXT EXIT
Press EXIT at
any time to
return to the
SETUP menu
Press NEXT or PREV to scroll through the
following list of Configuration information:
MODEL TYPE, NUMBER AND NAME
PART NUMBER
SERIAL NUMBER
SOFTWARE REVISION
LIBRARY REVISION
OS REVISION
SAMPLE CO2 RNG=20.00 % CO2=XXX.XX
<TST TST> CAL SETUP
5.2. S ETUP ACAL: [NOT USED]
ACAL on the primary SETUP menu is a special configuration. Contact factory.
5.3. SETUP DAS: INTERNAL DATA ACQUISITION SYSTEM
Use the SETUP>DAS menu to capture and record data. Refer to Section 7 for
configuration and operation details.
07276B DCN6418