Filter
Top Products
FC-210/310 TROUBLESHOOTING 4 - 6 February 2002 © TOSHIBA TEC
4.1.3 Paper transport jam (Paper not reaching the registration sensor after feeding)
[E21] Paper transport jam from the LCF
[E22] Paper transport jam from the 1st cassette
[E23] Paper transport jam from the 2nd cassette
[E24] Paper transport jam from the 3rd cassette
[E25] Paper transport jam from the 4th cassette
[E26] Paper transport jam from the bypass feed unit
Open the side door; does any paper remain in the paper path up to the registration roller?
Remove the paper.
Is the harness between the LGC board and the cassette feed-jam sensor open-circuited?
Is the harness between the LGC board and the registration sensor open-circuited?
Is the cassette feed-jam sensor connector, registration sensor connector, or the connector J107
or J108 on the LGC board disconnected?
Reconnect the connector. Replace the harness.
1. Replace the cassette feed-jam sensor or the registration sensor.
2. Replace the LGC board.
YES
NO
YES
NO