Filter
Top Products
February 2002 © TOSHIBA TEC 1 - 33 FC-210/310
ERROR CODES AND SELF-DIAGNOSIS
Setting mode (08)
Accep-
Code Name Default table Contents
Proce-
value
dure
1. 2. 5 Setting mode (08)
The following items can be set or changed in this mode (08).
200 Date and time setting – 13 digits Year/month/date/day/hour/minute/second 1
Example: 99:08:07:5:11:30:48
201 Destination selection EUR:0 0 ~ 2 0: Europe (A4/A3/Folio) 1
UC:1 1: USA/Canada (Letter/Ledger)
JPN:2 2: Japan (A4/B4)
202 Externally installed copy 0 0 ~ 3 0: No external copy counter/controller device 1
counter/controller device 1: Coin controller 2: Copy key card
3: Key copy counter
204 Auto-clear timer setting 3 0 ~ 10 When the [START] key is not pressed, the 1
time
l
ag before automatic clearing works
to
clear settings to defaults.
0: Disabled 1 to 10: Set number x 15 seconds
205 Energy saver timer setting 0 0 ~ 15 Timer for switching to Energy Saver mode se- 1
lected in 08-618 when the copier is not used.
0: Disabled 1: 30sec. 2: 60sec.
3: 90sec. 4: 120sec. 5: 150sec.
6: 3min 7: 4min 8: 5min 9: 7min
10: 10min 11: 15min 12: 20min
13: 30min 14: 45min 15: 60min
206 Automatic shutoff timer setting 20 0 ~ 20 Timer for switching to automatic shutoff state 1
when the copier is not used. US Energy Star
Compliance
0: 3min 1: 5min 2: 10min 3: 15min
4: 20min 5: 25min 6: 30min
7: 40min 8: 50min 9: 60min
10: 70min 11: 80min 12: 90min
13: 100min 14: 110min 15: 120min
16: 150min 17: 180min 18: 210min
19: 240min 20: Disabled
209 Timer for print job start-up time 1 1 ~ 10 Sets the period the control panel is not ope- 1
from copy mode when auto- rated when the data of the printer function is
clear is disabled sent before the print job starts. This function
is enabled when the auto-clear timer setting
(08-204) is set as "0" (disabled).
(Set number x 15 seconds)