Toshiba 310 Copier User Manual


 
February 2002 © TOSHIBA TEC 1 - 35 FC-210/310
ERROR CODES AND SELF-DIAGNOSIS
Setting mode (08)
Accep-
Code Name Default table Contents
Proce-
value
dure
302 Resettable/original counter EUR: 3 0 ~ 3 Sets if the resettable and original counters 1
display UC: 0 are displayed.
JPN:0 0: Off 1: Resettable counter
2: Original counter
3: Resettable/original counter
318 Paper size (non-standard) 432/ 148~457/ 4
feeding/widthwise direction 279 100~305
360 RADF switch back 0 0 ~ 1 Reversing the RADF transport belt during 1
original transporting to align originals
against the original scale.
0: Disabled 1: Enabled
361 RADF 0 0 ~ 1 When non-standard originals are used; 1
non-standard size original 0: Non-standard - Copier will stop and
detection prompt operator to select copy size.
1: Standard - Copier continues the current
job without stopping
390 HDD error frequency counter 0 0~32767 Resets when formatting the HDD 2
400 Image quality control 1 1 0 ~ 1 Auto-performing of image quality control 1
0: Disabled
1: Enabled (Performing 08-410,413)
401 Image quality control 2 1 0 ~ 1 Auto-performing of image quality control 1
0: Disabled 1: Enabled
* If Image quality control 1(08-400) is 0
(Disabled), this value must be set to 0
(Disabled).
402 Image quality control 5 1 0 ~ 1 Auto-performing of image quality control 1
0: Disabled 1: Enabled
* If both image quality control 2 (08-401) and
4 (08-411) are 0 (Disabled), this value must
be set to 0 (Disabled).
404 Image quality control 1 0 ~ 1 After the last image quality control, if the 1
auto-start (relative humidity variation of the relative humidity inside the
changes) copier becomes larger than the set value in
08-405, image quality control will be started
when the printing begins.
405 Relative humidity difference 1 0 ~ 1 Sets the difference of the relative humidity 1
setting at image qulity control for image quality control auto-start (relative
auto-start humidity changes).
0: 5%R.H. 1: 10%R.H. 2: 15%R.H.
3: 20%R.H. 4: 25%R.H. 5: 30%R.H.
6: 35%R.H.