February 2002 © TOSHIBA TEC 4 - 23 FC-210/310 TROUBLESHOOTING
4.1.10 Paper feeding system related service call
[C11] ADU paper side guide operation abnormal
Is the ADU pushed in securely to the copier?
Push in the ADU securely to the copier.
Has the timing belt for driving the paper side guide come off?
Put the belt on properly.
Is the connector J104 on the LGC board disconnected?
Is the harness between the LGC board and the ADU drawer connector open-circuited?
Reconnect the connector. Replace the harness.
1. Replace the LGC board.
2. Replace the ADU.
[C12] ADU paper end guide operation abnormal
Is the ADU pushed in securely to the copier?
Push in the ADU securely to the copier.
Has the timing belt for driving the paper end guide come off?
Put the belt on properly.
Is the connector J104 on the LGC board disconnected?
Is the harness between the LGC board and the ADU drawer connector open-circuited?
Reconnect the connector. Replace the harness.
1. Replace the LGC board.
2. Replace the ADU.
NO
YES
YES
NO
YES
NO
NO
YES
YES
NO
YES
NO