Filter
Top Products
February 2002 © TOSHIBA TEC 4 - 19 FC-210/310 TROUBLESHOOTING
[EAE] Finisher receiving time time-out jam
Is the finisher working?
Replace the finisher controller PC board.
1. Check if the voltage (24V) is being supplied to the finisher.
2. Check the connection of the LGC board and IPC board.
3. Check if the harness connecting the IPC board and finisher I/F connector of the copier side is
open-circuited.
4. Check if the harness connecting the I/F connector of the finisher side and finisher controller
PC board is open-circuited.
5. Replace the finisher controller PC board.
YES
NO