Filter
Top Products
FC-210/310 UPDATING THE FIRMWARE 5 - 24 February 2002 © TOSHIBA TEC
In case of target #1 - #5
Firmware Version Up Mode
Target:#1
Installing a new firmware.
— reading a file.
Target Version code
l installing
Displays the area being processed.
Firmware Version Up Mode
Target: 1
Installing new firmware.
— reading a file.
6. The copier starts updating when the [START] key is pressed.
Do not turn OFF the power of the copier or PC, or disconnect the cable after the [START] key
has been pressed.
Interruption during the file transmisson to the copier will destroy the file in the FROM of the
copier. The data must be reinstalled after checking and performing the following items.
• Connect the serial cable correctly.
• Restart the copier and PC.
• Change the "War FTP Daemon" to "ONLINE" mode.
• Copy the new files to the PC again.
In case of target 1 - 13 :
Displays the status of updating
process.
– reading file.
– erasing the device.
– writing to the device.
* During writing the data corresponding to the target 11 - 13, the transmission rate is displayed.
- writing to the divice.
xxxxx/XXXXX transmitted / total (byte)