Filter
Top Products
FC-210/310 UPDATING THE FIRMWARE 5 - 20 February 2002 © TOSHIBA TEC
Enter "#39" in the "Phone number" box.
Firmware Version Up Mode
> Make a connection from PC.
5.2.3 Updating firmware
Update the firmware in the [3][9] mode as follows:
1. Turn ON the power of the copier while the digital keys [3] and [9] are pressed simultaneously.
2. The following is displayed on the control panel of the copier.
3. Make a serial connection using the dial-up networking function of the PC.
Refer to "5.1 Installing Software for Firmware Update" for the dial-up network connection.
Double-click the defined icon for connection in the "Dial-up Networking" dialog box to perform the
connection processing.