Filter
Top Products
FC-210/310 ADJUSTMENT 2 - 28 February 2002 © TOSHIBA TEC
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn ON the power.
(2) Enter code [682] with digital keys.
(3) Enter a setting value:
The setting value should be in two digits; the first digit is the
time-out period for A3/LD original size while the second digit is
the time-out period (seconds) for A4/LT original size. Both digits
should be in the range of 1 to 9. However, time is set in proportion
to original sizes for originals larger than A4/LT, based on A4/LT
and A3/LD setting value.
(4) Press the [SET] or [INTERRUPT] key to store the setting value.
(b) AI mode time-out setting
Set the maximum processing time allowable in the AI mode.
Note: In case discrimination does not finish within specified time, AI mode discrimination stops and copy operation
is performed in the selected copy mode.
Two kinds of setting are made; one for originals of A4/LT or smaller sizes, and the other for originals larger
than A4/LT.
Code Adjustment item Contents
682 AI mode
time-out setting
2.6.6 AI mode setting
(a) AI mode discrimination setting
Select the discrimination level in the AI mode as follows:
Code Adjustment item Contents
678 AI mode
discrimination setting
<Procedure>
(1) While pressing [0] and [5] simultaneously, turn ON the power.
(2) Enter code [678] with digital keys.
(3) Enter a setting value:
0: Standard (for regular)
1: Photograph priority
2: Only judgment of original type
3: Only judgment of original type with photograph priority
4: No AI discrimination
(4) Press the [SET] or [INTERRUPT] key to store the setting value.