Filter
Top Products
FC-210/310 TROUBLESHOOTING 4 - 24 February 2002 © TOSHIBA TEC
[C18] LCF tray operation abnormal
Is the harness between the LGC board and the LCF unit open-circuited?
Is the relay connector of the harness between the LGC board and the LCF unit or the connector
J105 on the LGC board disconnected?
Reconnect the connector. Replace the harness.
Are the switches and sensors in the LCF unit working properly?
1. Replace the LCF tray motor.
2. Replace the LGC board.
1. Replace the sensors and switches.
2. Replace the LCF drive PC board or the LCF tray-down switch PC board.
3. Replace the LGC board.
[C13] 1st cassette tray operation abnormal
[C14] 2nd cassette tray operation abnormal
[C15] 3rd cassette tray operation abnormal
[C16] 4th cassette tray operation abnormal
Is the cassette pushed in properly to the copier?
Push in the cassette properly to the copier.
Is the harness between the LGC board and the cassette tray-up limit sensor open-circuited?
Is the harness between the LGC board and the cassette tray-up motor open-circuited?
Is the cassette tray-up limit sensor connector, cassette tray-up motor connector, or connector
J106 on the LGC board disconnected?
1. Reconnect the connector.
2. Replace the harness.
Is the gear of the cassette tray-up motor unit broken?
Replace the gear.
1. Replace the cassette tray-up motor.
2. Replace the cassette tray-up limit sensor.
3. Replace the paper feed unit.
4. Replace the LGC board.
NO
YES
YES
NO
YES
NO
YES
NO
YES
NO