Filter
Top Products
FC-210/310 TROUBLESHOOTING 4 - 8 February 2002 © TOSHIBA TEC
[E43] ADU pulled out during printing
Is the ADU pushed in securely to the copier?
Push in the ADU securely to the copier.
Is connector J104 on the LGC board disconnected?
Is the harness between the LGC board and the ADU drawer connector open-circuited?
Reconnect the connector. Replace the harness.
1. Replace the LGC board.
2. Replace the ADU.
[E45] LCF jam access cover opened during printing
Is the LCF jam access cover open?
Close the LCF jam access cover.
Is the harness between the LGC board and the LCF unit open-circuited?
Is the relay connector of the harness between the LGC board and the LCF unit or the connector
J105 on the LGC board disconnected?
Reconnect the connector. Replace the harness.
1. Replace the LGC board.
2. Replace the LCF unit.
[E46] Bypass unit opened during printing
Is the bypass unit open?
Close the bypass unit.
Is the harness between the LGC board and the bypass unit open/close switch open-circuited?
Is the bypass unit open/close switch connector or the connector J108 on the LGC board discon-
nected?
Reconnect the connector. Replace the harness.
1. Replace the bypass unit open/close switch.
2. Replace the LGC board.
NO
YES
YES
NO
YES
NO
YES
NO
YES
NO
YES
NO