Filter
Top Products
3 PRINTING
156 Printing from Windows
2
Display the [Configuration] tab and set the following options.
Drawers — This sets the Drawer configuration according to the Drawers installed.
y Drawer 1: 1st Drawer only
y Drawer 1 & 2: 1st Drawer and Paper Feed Unit (optional)
y Drawer 1,2 & 3: 1st Drawer, Paper Feed Unit (optional) and Paper Feed Pedestal
(optional, its upper Drawer only)
y Drawer 1,2,3 & 4: 1st Drawer, Paper Feed Unit (optional) and Paper Feed Pedestal
(optional, both of its upper and lower Drawers)
Automatic Duplexer
Select whether the Automatic Duplexer (optional) is installed or not.
None
– Select this when the Automatic Duplexer is not installed.
Installed – Select this when the Automatic Duplexer is installed.
Drawer 1 — Select the size that is loaded in the 1st Drawer.
Drawer 2 — Select the size that is loaded in the 2nd Drawer (Paper Feed Unit (optional))
when it is installed.
Drawer 3 — Select the size that is loaded in the 3rd Drawer (the upper Drawer of Paper
Feed Pedestal (optional)) when it is installed.
Drawer 4 — Select the size that is loaded in the 4th Drawer (the lower Drawer of Paper
Feed Pedestal (optional)) when it is installed.
Bypass Tray — Set to “Automatic”. (Not selectable).
For more information about each item, see descriptions about the Configuration Tab.
P.187 “Configuration tab”
3
Click [Apply] and [OK] to save settings.