Filter
Top Products
Printing from Windows 173
— Layout tab - Standard window
The standard window of the Layout tab allows you to enable the front or back cover printing.
y Front Cover printing is also available with Booklet printing. If can be set in the Booklet win-
dow.
y Front Cover printing and Back Cover printing are also available with N-up printing. They can
be set in the Multiple Pages per Sheet window.
1) Use Front Cover
This sets front cover printing which allows you to insert or print a cover on a sheet fed from a
different tray than the Paper Source option selected on the Setup tab.
To enable cover printing, check on the box and select the location from where a cover sheet
is to be fed and the print style to be used.
Source
Select the location from where a cover sheet is to be fed. When “Automatic” is selected, the
paper is automatically selected according to the printed document size.
y The selectable values in the Source drop down box vary depending on the optional
devices installed on this equipment and their configuration on the Configuration tab.
y When you feed paper from the Bypass Tray, press the [START] button. To cancel print-
ing, press the [CLEAR/STOP] button.
Print Style
This selects how you want to print a cover.
- Do not print on page
— Select this to insert a blank cover.
- Print on 1 side of page — Select this to print the first page image on the front side of a
cover.
- Print on both sides of page — Select this to print the first two page images on both
sides of a cover. This is available only when the 2-Sided Printing option is enabled on the
Setup tab.
1
2