Filter
Top Products
Installing Client Software for Windows 35
9
The installation is completed.
Before using the printer driver for printing, please configure the installed options of the
equipment and department code (if required) on the printer driver.
P.154 “Before using the printer driver”
Installing client software for Raw TCP/LPR printing
This section describes how to set up the printer drivers for Raw TCP/LPR printing which is avail-
able for the local area network over TCP/IP.
There are Two ways to set up the printer drivers for Raw TCP/LPR printing:
y Using the installer in the Client Utilities CD-ROM
You can set up the printer drivers for Raw TCP/LPR printing by installing the printer drivers
using the installer in the Client Utilities CD-ROM.
P.36 “Installation for Raw TCP/LPR printing using the installer”
y Using Add Printer Wizard
When you want to install the printer drivers without using the installer, or when you want to
install the same printer driver for another equipment, install the printer drivers using the Add
Printer Wizard.
P.49 “Installation for Raw TCP/LPR Printing by Add Printer Wizard”
The Font Manager is available to install and manage the TrueType fonts on your computer. To
install the Font Manager, you must install it from the Client Utilities CD-ROM.
P.246 “Installing Font Manager”
y Before operating the following setup, check with your system administrator to make sure of
the following:
- This equipment is connected to the network and turned on.
- The TCP/IP setting is correct on this equipment and your computer.
y Raw TCP Printing is only available for Windows 2000, Windows XP, and Windows Server
2003.
y LPR Printing is only available for Windows NT 4.0, Windows 2000, Windows XP, and Win-
dows Server 2003.