Filter
Top Products
Printing from Windows 187
3) [Run Font Manager]
Click this to run the Font Manager. This is not available if the Font Manager is not installed.
The [Run Font Manager] button is not displayed for the PCL6 printer driver.
— Configuration tab
The Configuration Tab allows you to configure options. When any optional unit is installed in this
equipment, set the configuration of the machine on this tab.
1) Drawers
Drawers- This sets the Drawer configuration according to the Drawers installed.
- Drawer 1: 1st Drawer only
- Drawer 1 & 2: 1st Drawer and Paper Feed Unit (optional)
- Drawer 1,2 & 3: 1st Drawer, Paper Feed Unit (optional) and Paper Feed Pedestal
(optional, its upper Drawer only)
- Drawer 1,2,3 & 4: 1st Drawer, Paper Feed Unit (optional) and Paper Feed Pedestal
(optional, both of its upper and lower Drawers)
2) Automatic Duplexer
Select whether the Automatic Duplexer (optional) is installed or not.
None
– Select this when the Automatic Duplexer is not installed.
Installed – Select this when the Automatic Duplexer is installed.
3) Drawer 1
This sets the size of paper that is loaded in the 1st Drawer.
4) Drawer 2
This sets the size of paper that is loaded in the 2nd Drawer (Paper Feed Unit (optional)).
This can be set only when the Paper Feed Unit (optional) is installed.
5) Drawer 3
This sets the size of paper that is loaded in the 3rd Drawer (the upper Drawer of Paper Feed
Pedestal (optional)). This can be set only when the upper Drawer of Paper Feed Pedestal
(optional) is installed.
6) Drawer 4
This sets the size of paper that is loaded in the 4th Drawer (the lower Drawer of Paper Feed
Pedestal (optional)). This can be set only when the lower Drawer of Paper Feed Pedestal
(optional) is installed.
1
9
10
11
2
3
4
5
6
7
8