Filter
Top Products
Printing from Macintosh 235
Printing Modes DC (Department Code) on Mac OS X 10.2.4 to 10.2.8
In the DC menu, you can specify your department code, if this equipment is enabled the depart-
ment codes. Before specifying the department code, you must check the Department Code
option in the Printing Modes menu. Then specify the department code in this menu.
This menu is only displayed for Mac OS X 10.2.4 to 10.2.8. When you want to set the depart-
ment code in Mac OS X 10.3.x/10.4.x, set in the Print Mode menu.
P.232 “Print Mode on Mac OS X 10.3.x/10.4.x”
When printing is made with an invalid department code, the job is deleted. (If the “Enable SNMP
Communication” check box of the Configuration tab menu of the printer is checked, an error
message appears before the job is deleted.)
1) Department Code (DC) - Digit 1
Select the first digit of the department code.
2) Department Code (DC) - Digit 2
Select the second digit of the department code.
3) Department Code (DC) - Digit 3
Select the third digit of the department code.
4) Department Code (DC) - Digit 4
Select the forth digit of the department code.
5) Department Code (DC) - Digit 1
Select the fifth digit of the department code.
1
2
3
4
5