Filter
Top Products
3 PRINTING
196 Printing from Windows
4
If you want to add a margin on the outside edge, enter a width in the
“Outer Margin” field.
y You can change the unit of the margin at the “Units” drop down box.
y The center margin can be set from 0.000 inch to 1.00 inches in units of 0.01 inch
when the unit is inch, and from 0.000 mm to 25.40 mm in units of 0.10 mm when the
unit is mm.
5
If you want to create a booklet that can be read from right to left,
check the “Number Pages from Right to Left” box.
6
If you want to print or insert a front cover, check the “Use Front
Cover” box and then select, at the “Source” drop down box, the
drawer where the front cover is loaded. Also, at the “Print Style”
drop down box, select whether you are inserting a blank cover or
printed front cover. Then select the paper type for a front cover at
the “Paper Type” drop down box.
y Print Style
This selects how you want to print a cover.
- Do not print on page
— Select this to insert a blank cover.
- Print on both sides of page — Select this to print the first two page images on
both sides of a cover.
y Paper Type
This sets the media type of the paper.
- Plain
— Select this when printing on 20 lbs plain paper (64-80 g/m
2
plain paper).
- Thick1 — Select this when printing on 24-28 lbs thick paper (81-105 g/m
2
thick
paper).
- Thick2 — Select this when printing on 32-90 lbs thick paper (106-163 g/m
2
thick
paper).
- Transparency — Select this when printing on transparent sheets.
y When “Automatic” is selected in the “Source” drop down box, the paper is automati-
cally selected according to the printed document size.
y “Print on both sides of page” is available only when 2-Sided printing is enabled at the
Setup tab.
7
Set other print options you require and click [OK].
8
Click [OK] or [Print] to send a print job.
The print job is printed as a booklet.