Filter
Top Products
User’s Manual 5-5
The Keyboard
Display selection: Press Fn + F5 to change the active display device.
When you press these hot keys, a window will be displayed showing the
available devices that can be selected - you are then able to hold down the
Fn key, release the F5 key and press it again in order to toggle between the
various devices that are available, while releasing both the Fn and F5 keys
will put the selected setting into effect. If you hold down these hot keys for
five seconds, the display selection will return to the internal LCD display.
Internal LCD Display Brightness: Pressing Fn + F6 decreases the LCD
display brightness in individual steps. When you press these hot keys, the
current setting will be displayed for a period of two seconds by an icon. You
are also able to change this setting through the Screen brightness item of
the Basic Setup tab within the TOSHIBA Power Saver.
Internal LCD Display Brightness: Pressing Fn + F7 increases the LCD
display brightness in individual steps. When you press these hot keys, the
current setting will be displayed for a period of two seconds by an icon. You
are also able to change this setting through the Screen brightness item of
the Basic Setup tab within the TOSHIBA Power Saver.
Wireless setting: If your computer has both Bluetooth and Wireless LAN
functions, you can press Fn + F8 to select which type of wireless
communication you want to use. When you press these hot keys, a dialog
box will appear. Continue holding down Fn and press F8 to change the
setting. If wireless communication is turned off, Disabled Wireless
Communication Switch will be displayed.
The clarity of the image on the internal LCD display will increase with the
brightness level.
If no wireless communication device is installed, no dialog box will appear.