Filter
Top Products
10-22 User’s Manual
Troubleshooting
Bluetooth
For further information on Bluetooth wireless communication, please refer
to Chapter 4, Operating Basics.
TV output function
Problem Procedure
Cannot access
Bluetooth device
Check to ensure the computer’s Wireless
Communication Switch is set to on.
Check to ensure the Bluetooth Manager
application is running on the computer and that
power to the external Bluetooth device is
switched on.
Check to ensure that no optional Bluetooth PC
Card or Bluetooth SD Cards are installed in the
computer - the built-in Bluetooth hardware
cannot operate simultaneously with another
Bluetooth controller.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
Problem Procedure
Display on TV is poor Check to ensure the television type is set
correctly your region - NTSC should be used for
the United States and Japan, while PAL should
be used for Europe.
No display Try adjusting the contrast and brightness controls
on the television.
Press the Fn + F5 hot key in order to change the
display priority and ensure that it is not set for the
internal LCD display only.
If you are still unable to resolve the problem,
contact your reseller, dealer or service provider.
If you turn the computer off into Standby Mode while the display is on TV,
the computer will select either the internal LCD or an external computer
CRT as the display device the next time is switched on.