Filter
Top Products
User’s Manual 3-11
Getting Started
Turning on the power
This section describes how to turn on the power - the Power indicator will
then indicate the status. Please refer to the Power indicators section in
Chapter 6, Power for more information.
1. Open the computer’s LCD display panel.
■ As the LCD display panel cannot be opened until 180 degrees, please
be careful of the angle when flipping open the LCD display panel.
■ Be careful not to open the LCD display panel too far as this could put
stress on the display panel’s hinges and cause damage.
■ Do not press or push on the LCD display panel.
■ Do not lift the computer by the LCD display panel.
■ Do not close the LCD display panel with pens or any other objects left
in between the LCD display panel and the keyboard.
■ When opening or closing the LCD display panel, place one hand on the
palm rest to hold the computer in place and use the other hand to
slowly open or close the LCD display panel (Do not use excessive
force when opening or closing the LCD display panel).
■ After you turn on the power for the first time, do not turn it off until you
have set up the operating system. Please refer to the section Starting
up for the first time for more information.
■ If a USB floppy disk drive is connected, please make sure that it is
empty - if a floppy disk is in the drive, press the eject button and
remove it.
■ Volume cannot be adjusted during Windows Setup.