Filter
Top Products
User’s Manual D-5
TOSHIBA RAID
3. The Execute Creation message is displayed once the configuration is
modified. Move the cursor to the appropriate location and press the
space bar to continue.
4. The following message will be displayed. Follow the instructions and
press the keys in the following order of 1, 2, 3, 4, [Enter].
Ending the BIOS Setup Program
In order to save the changes you have made and end the BIOS setup
application, follow the steps as detailed below:
1. Press the End key - this will cause the Are you sure? (Y/N). The
changes you made will cause the system to reboot.
prompt to be displayed at the bottom of the screen.
2. Press the Y key - this will save the configuration changes and end the
BIOS setup application, automatically restarting the computer.
Pressing the Home key will revert the modified Create State settings back
to the Current State settings.
S
Warning: If you change the RAID array, you
will need to install the OS again. Are you
sure? All data on the HDD(s) will be
destroyed. Do you really want to do this? If
“Yes”, please type the key string which is
written in the manual.