Filter
Top Products
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND INSTALLATION
4 - 54
(8) Remove 1 E-ring. Then remove the shaft and
the spring to take off the tapping arm.
Note:
Install the tapping arm as shown in the fig-
ure.
Fig. 4-150
(9) Move the buffer guide to both ends by push-
ing the buffer roller.
Fig. 4-151
(10) Remove the spring and 2 E-rings. Then take
off the front buffer roller guide.
Fig. 4-152
Spring
Tapping arm
Shaft
Buffer roller
Buffer guide
Spring
Front buffer roller guide