Filter
Top Products
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND INSTALLATION
4 - 112
[D] Ejecting roller sensor (S29)
(4) Release the latch, and then take off the
transport path-3 sensor.
Fig. 4-317
(1) Open the front upper cover and then pull out
the saddle unit.
(2) Open the transport guide of right side.
(3) Remove 1 screw, and then disconnect the
connector and take off the sensor bracket.
Fig. 4-318
(4) Release the latch, and then take off the
ejecting roller sensor.
Fig. 4-319
Transport path-3 sensor
Sensor bracket
Ejecting roller sensor