Toshiba MJ-1103 Printer Accessories User Manual


 
4
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4 - 63
[E] Exit roller
(10) Take off the 2 Jam release levers, 2 springs
and lower folding roller.
Fig. 4-177
(1) Open the front upper cover and then pull out
the saddle unit.
(2) Remove 2 screws and take off the lower
transport guide.
Note:
Be careful not to damage the harness con-
nected to the lower transport guide.
Fig. 4-178
(3) Remove 1 clip and take off the bushing and
exit roller.
Fig. 4-179
Lower folding roller
Jam release lever
Jam release lever
Spring
Spring
Lower transport guide
Clip
Clip
Bushing
Exit roller