Filter
Top Products
4
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4 - 111
[C] Transport path-3 sensor (S28)
(3) Remove 1 screw, and then disconnect the
connector and take off the sensor bracket.
Fig. 4-314
(4) Release the latch, and then take off the
transport path-2 sensor.
Fig. 4-315
(1) Open the front upper cover and then pull out
the saddle unit.
(2) Open the transport guide of right side.
(3) Remove 1 screw, and then disconnect the
connector and take off the sensor bracket.
Fig. 4-316
Sensor bracket
Transport path-2 sensor
Sensor bracket