Filter
Top Products
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND INSTALLATION
4 - 110
4.10 Sensors / Switches (Saddle section: MJ-1104)
[A] Junction box paper detection sensor (S26)
[B] Transport path-2 sensor (S27)
(1) Take off the junction box unit.
P.4-13 "[A] Junction box unit"
(2) Remove 1 screw, and then disconnect the
connector and take off the sensor bracket.
Fig. 4-311
(3) Release the latch, and then take off the junc-
tion box paper detection sensor.
Fig. 4-312
(1) Open the front upper cover and then pull out
the saddle unit.
(2) Remove 4 screws, and then take off the
upper safety cover.
Fig. 4-313
Sensor bracket
Junction box paper
detection sensor
Upper safety cover