Filter
Top Products
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND INSTALLATION
4 - 116
[J] Folding blade home position sensor (S35)
[K] Side alignment home position sensor (S36)
(1) Open the front upper cover and then pull out
the saddle unit.
(2) Disconnect the connector, and release the
latch, and then take off the folding blade
home position sensor.
Fig. 4-329
(1) Open the front upper cover and then pull out
the saddle unit.
(2) Remove 4 screws, and then take off the
upper safety cover.
Fig. 4-330
(3) Move the alignment plates to the center.
(4) Disconnect the connector, and release the
latch, and then take off the side alignment
home position sensor.
Fig. 4-331
Stacker guide
Folding blade home position sensor
Stacker guide
Upper safety cover
Stacker guide
Alignment plates
Side alignment home position sensor