Filter
Top Products
4
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4 - 67
[H] Stack transport motor (M8)
(3) Remove 2 screws, and then disconnect the
connector and remove the belt to take off the
transport motor.
Fig. 4-189
(4) Remove 2 screws, and then remove the 2
spacers, 2 screw dampers, earth plate,
bracket and motor damper.
Fig. 4-190
(1) Take off the grate-shaped guide.
P.4-10 "[N] Grate-shaped guide"
(2) Remove 1 clip, and then take off the clip,
gear, and shaft.
Fig. 4-191
Transport motor
Earth plate
Spacer
Screw damper
Screw damper
Motor damper
Transport motor
Pin
Gear
Bushing
Clip
Shaft