Filter
Top Products
4
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4 - 27
(6) Remove one clip and then remove the shaft
of saddle harness frame.
(7) Take off the saddle unit.
Notes:
• Hold the part of the saddle unit as shown
in the figure during disassembling.
• When the saddle unit was taken off, place
the unit on a flat place with its support
stored (flipped up).
Fig. 4-74
Fig. 4-75
Saddle harness
frame
Shaft
Clip
Saddle unit
support