Filter
Top Products
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DESCRIPTION OF OPERATIONS
3 - 16
[D] Paper holding
The paper holding clutch (CLT4) is turned ON to let the saddle transport motor (M16) drive the paper
holding cam.
The home position of the paper holding cam is detected by the paper holding home position sensor
(S38).
Fig. 3-20
[E] Stapling
Stacks of paper aligned and fixed at the stapling position are stapled with two stapler units on the front
and rear sides.
Paper holding home position sensor
Paper holding clutch
saddle transport motor
Paper holding damper
Paper holding cam