Filter
Top Products
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND INSTALLATION
4 - 74
4.7 Motor (Saddle section: MJ-1104)
[A] Stacker motor (M14)
(1) Take off the stacker unit.
P.4-37 "[H] Stacker unit"
(2) Move the stacker to the upper position.
(3) Remove 1 E-ring, and then take off the
spring, belt and shaft by sliding the bushing.
Note:
Do not lose the removed bushing of the
shaft.
Fig. 4-207
(4) Remove 1 E-ring, and then take off the
stacker.
Fig. 4-208
(5) Remove 3 screws, and then take off the
motor bracket.
Note:
Do not lose the removed gear of the motor
bracket.
Fig. 4-209
Bushing
Shaft
Bushing
Belt
Spring
Stacker
Gear
Motor bracket