Filter
Top Products
4
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4 - 55
(11) Remove 2 E-rings, 2 gears, 1 spacer and the
pin. Then take off the rear buffer roller guide.
Fig. 4-153
(12) Remove the E-ring, and then take off the
shaft from the lift guide to take off the buffer
roller.
Fig. 4-154
(13) Take off the lift guide from the buffer roller.
Fig. 4-155
Rear buffer roller guide
Gear
Pin
Buffer roller
Spacer
Gear
Lift guide
Shaft
Buffer roller
Lift guide