Filter
Top Products
4
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4 - 23
[F] Movable tray shift motor unit
(5) Remove 2 screws, and then disconnect 2
connectors of the stapler to take off the sta-
pler.
Fig. 4-64
(1) Take off the rear cover.
P.4-6 "[G] Rear cover"
(2) Move the movable tray shift frame to the mid-
dle position. If the movable tray shift frame
needs to be lowered, push the gear of the
movable tray shift motor unit in the direction
of the arrow to unlock the frame. (Be sure to
hold the movable tray gear frame with your
hands because it may fall when the gear is
pushed.)
Fig. 4-65
Staple
Movable tray
Gear of the
movable tray
shift motor unit