Filter
Top Products
4
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4 - 79
4.8 Solenoid
[A] Shutter clutch (CLT1)
[B] Paper exit guide clutch (CLT2)
(1) Take off the rear cover.
P.4-6 "[G] Rear cover"
(2) Remove 1 E-ring, and then disconnect the
relay connector to take off the shutter clutch.
Note:
When installing the shutter clutch, attach a
rotation protection.
Fig. 4-222
(1) Take off the grate-shaped guide.
P.4-10 "[N] Grate-shaped guide"
(2) Remove 4 E-rings, and then slide the bush-
ing.
Fig. 4-223
(3) Take off the belt of the stack transport motor.
Fig. 4-224
Shutter clutch
Rotation
protection
Bushing
Stack transport motor Belt