Toshiba MJ-1103 Printer Accessories User Manual


 
MJ-1103/1104 © 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved
DISASSEMBLY AND INSTALLATION
4 - 92
[C] Paddle home position sensor (S3)
(4) Release the latch, and then take off the
transport sensor.
Fig. 4-258
(1) Take off the rear cover.
P.4-6 "[G] Rear cover"
(2) Disconnect all the connectors of the FIN
board and then release the harness from the
clamp.
(3) Remove 4 screws from the FIN board
bracket.
Fig. 4-259
(4) Remove 1 screw, and then disconnect the
connector and take off the sensor bracket.
Fig. 4-260
Transport sensor
FIN board
bracket
Sensor bracket