Filter
Top Products
4
© 2008, 2009 TOSHIBA TEC CORPORATION All rights reserved MJ-1103/1104
DISASSEMBLY AND INSTALLATION
4 - 103
[Q] Feeding sensor (S22)
(3) Remove 1 screw, and then take off the actu-
ator and the spacer.
Fig. 4-290
(4) Release the latch, and then take off the sta-
tionary tray paper-full sensor.
Fig. 4-291
(1) Take off the relay guide, feeding discharge
brush and right cover.
P.4-7 "[K] Relay guide / Feeding dis-
charge brush / Right cover"
(2) Remove 1 screw, and then disconnect the
connector and take off the sensor bracket.
Fig. 4-292
Actuator
Spacer
Stationary tray
paper-full sensor
Sensor bracket