Filter
Top Products
Tests and Diagnostics
3.3.3.2 RAID : not OPTIMAL
ABSENT or OFFLINE is displayed
When the “ABSENT” or “OFFLINE” is displayed as shown below, the drive is
removed by the RAID console and installed again. When the drive is unlocked,
“ABSENT” is displayed. When the drive is locked, “OFFLINE” is displayed. Repair
is not needed in this case.
TOSHIBA RAID / RAID Information Display Rev xx.xx.xxxx
Copyright(c) 2005 TOSHIBA CORPORATION. All Rights Reserved.
Level Status Capacity
LD0 RAID-1 DEGRADE xxGB
Write cache : Enable
MBR Protection : Disable
S.M.A.R.T : Enable
Port Assgn Status Size Model Rev
0 LD0-0 ONLINE xxGB FUJITSU---------- xxxxxxx
1 LD0-1 ABSENT xxGB FUJITSU---------- xxxxxxx
< RAID : not OPTIMAL >
3-14 [CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)