Filter
Top Products
2 Troubleshooting Procedures
TECRA S3 Maintenance Manual (960-532) [CONFIDENTIAL] 2-9
DC IN
Error code Meaning
10h AC Adaptor output voltage is over 16.5V.
11h Common Dock voltage is over 16.5V.
12h Current from the DC power supply is over 7.00A.
13h Current from the DC power supply is over 0.5A when there is no load.
14h Current sensing IC is not normal.
1st Battery
Error code Meaning
22h Main battery discharge current is over 0.5A.
23h Main battery charge current is over 3.9A when the battery is charged.
24h Current sensing IC is not normal.
25h
Main battery charge current is over 0.3A when the battery is not
charged.
2nd Battery
Error code Meaning
32h Secondary battery discharge current is over 0.5A.
33h Secondary battery charge current is over 3.9A when the battery is
charged.
34h Current sensing IC is not normal.
35h Secondary battery charge current is over 0.3A when the battery is not
charged.
S3V output
Error code Meaning
40h S3V voltage is over 3.47V when the computer is powered on/off.
45h S3V voltage is under 3.14V when the computer is powered on/off.
46h S3V voltage is under 3.14V when the computer is booting up.
Formatted:
Indent: Left: 17.85
pt, Hanging: 17.85 pt, Numbered
+ Level: 1 + Numbering Style:
Bullet + Start at: 1 + Alignment:
Left + Aligned at: 18 pt + Tab
after: 0 pt + Indent at: 36 pt,
Tabs: 18 pt, Left
Formatted:
Indent: Left: 17.85
pt, Hanging: 17.85 pt, Numbered
+ Level: 1 + Numbering Style:
Bullet + Start at: 1 + Alignment:
Left + Aligned at: 18 pt + Tab
after: 0 pt + Indent at: 36 pt,
Tabs: 18 pt, Left
Formatted:
Indent: Left: 17.85
pt, Hanging: 17.85 pt, Numbered
+ Level: 1 + Numbering Style:
Bullet + Start at: 1 + Alignment:
Left + Aligned at: 18 pt + Tab
after: 0 pt + Indent at: 36 pt,
Tabs: 18 pt, Left
Formatted:
Indent: Left: 17.85
pt, Hanging: 17.85 pt, Numbered
+ Level: 1 + Numbering Style:
Bullet + Start at: 1 + Alignment:
Left + Aligned at: 18 pt + Tab
after: 0 pt + Indent at: 36 pt,
Tabs: 18 pt, Left