Filter
Top Products
3. Release the latches of the battery slider B and remove the slider cap from the bottom
of the computer.
4. Take out the battery slider B from the base cover.
Slider cap
Spring
Battery slider B
Figure 4-56 Removing the battery slider B
Installing the Battery slider
To install the Battery slider, follow the steps below and refer to Figure 4-55 and 4-56.
1. Install the spring to the battery slider B and set them to the base assembly.
2. Install the slider cap to the base cover from the bottom of the computer.
3. Install the spring to the battery slider A and set them to the base assembly.
4. Install the slider cap to the base cover from the bottom of the computer.
4-74 [CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)