Filter
Top Products
Tests and Diagnostics
3-116 [CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)
When “Enabled” is selected, the following sub-window appears.
Use this option to set a key combination on an external keyboard to emulate
the Fn key on the computer’s internal keyboard. Setting a Fn key equivalent
will enable you to use “Hotkeys” by pressing the set combination in place of
the Fn key. The following items can be selected for this option:
Left Ctrl + Left Alt*
Right Ctrl + Right Alt*
Left Alt + Left Shift
Right Alt + Right Shift
Left Alt + Caps Lock
*If these selections are made, you cannot warm boot the system by pressing
Ctrl + Alt + Del.
(c) Parallel Port Mode
The option selects Parallel Port Mode.
ECP Sets the port mode to ECP (Extended Capabilities Port).
For most printers, the port should be set to ECP. (Default)
Std. Bi-Direct. Sets the bi-directional setting. This setting should be used
with some other parallel devices.
15. Legacy Emulation.
(a) USB KB/Mouse Legacy Emulation.
This option sets the Legacy support condition of the USB keyboard and the
USB mouse.
Enabled USB Legacy Support can be used. (Default)
USB keyboard/USB mouse are available without a driver.
Disabled USB Legacy Support cannot be used.
(b) USB-FDD Legacy Emulation.
This option sets the Legacy support condition of the USB floppy disk drive.
Enabled USB Legacy Support can be used. (Default)
USB floppy disk is available without the driver.
Disabled USB Legacy Support cannot be used.
Ext Keyboard "Fn" key equivalent
= Left Ctrl + Left Alt
KEYBOARD