Filter
Top Products
115
Click Add
Enter a Name and Description for the EMD and select pre-configured serial port that the EMD
will be Connected Via
Provide Labels for each of the two alarms
Check Log Status and specify the Log Rate (minutes between samples) if you wish the status
from this EMD to be logged. These logs can be views from the Status: Environmental Status
screen
Click Apply
8.3.2 Environmental alerts
You can now set temperature, humidity and probe status alerts using Alerts & Logging: Alerts (refer to
Chapter 7)
8.3.3 Environmental status
You can monitor the current status of all of EMDs and their probes