Filter
Top Products
4
6.2.9 Choosing an alternate SSH client (e.g. PuTTY) 70
6.3 SDT Connector to Management Console 75
6.4 SDT Connector - Telnet or SSH connect to serially attached devices 76
6.5 Using SDT Connector for out-of-band connection to the gateway 77
6.6 Importing (and exporting) preferences 79
6.7 SDT Connector Public Key Authentication 79
6.8 Setting up SDT for Remote Desktop access 80
6.8.1 Enable Remote Desktop on the target Windows computer to be accessed 80
6.8.2 Configure the Remote Desktop Connection client 81
6.9 SDT SHH Tunnel for VNC 85
6.9.1 Install and configure the VNC Server on the computer to be accessed 85
6.9.2 Install, configure and connect the VNC Viewer 86
6.10 Using SDT to IP connect to hosts that are serially attached to the gateway 88
6.10.1 Establish a PPP connection between the host COM port and Console Server 88
6.10.2 Set up SDT Serial Ports on Console Server 91
6.10.3 Set up SDT Connector to ssh port forward over the Console Server Serial Port 92
7. ALERTS AND LOGGING 93
7.1 Configure SMTP/SMS/SNMP/Nagios alert service 93
7.1.1 Email alerts 93
7.1.2 SMS alerts 94
7.1.3 SNMP alerts 95
7.1.4 Nagios alerts 96
7.2 Activate Alert Events and Notifications 96
7.2.1 Add a new alert 97
7.2.2 Select general alert type 98
7.2.3 Configuring environment and power alert type 99
7.3 Remote Log Storage 100
7.4 Serial Port Logging 101
7.5 Network TCP or UDP Port Logging 102
POWER & ENVIRONMENTAL MANAGEMENT 103
8.1 Remote Power Control (RPC) 103
8.1.1 RPC connection 103
8.1.2 RPC alerts 105
8.1.3 RPC status 105