Filter
Top Products
65
configure access to network-connected Hosts that the user is authorized to access
and set up (for each of these Hosts) the services (e.g. HTTPS, IPMI2.0) and the
related IP ports being redirected
configure access to the Console Server itself (this is shown as a Local Services host)
configure access with the enabled services for the serial port devices connected to
the Console Server
Note The Retrieve Hosts function will auto-configure all classes of user (i.e. they can be members of
user or admin or some other group or no group). SDT Connector will, however, not auto-
configure the root (and it is recommended that this account is only used for initial config and for
adding an initial admin account to the Console Server)
6.2.4 Make an SDT connection through the gateway to a host
Simply point at the host to be accessed and click on the service to be used in accessing that
host. The SSH tunnel to the gateway is then automatically established, the appropriate ports
redirected through to the host, and the appropriate local client application is launched pointing
at the local endpoint of the redirection: